PZ-5-type Spraying Machine

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

PZ-5-type Spraying Machine

Shotcrete Spraying Machine   ,   shotcrete guniting machine , concrete shotcrete machine

Product Introduction

PZ-5-type spraying machine is widely used in construction, mining, tunnels, culverts, subway, hydropower engineering, underground engineering and high marsh coal mine tunnel shotcrete construction operations,various industrial furnaces, repairing or spraying refractory lining and Various green slope, soil transport and injection.The machine can also be used for tidal spray, dry spray and fibers spray.

Feature

1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving.

2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life., 

3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.

4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete. 

Structure

PZ-5 explosion-proof dry-jet is made up of driven explosion-proof motor, speed reducer, the assembly rotor body , sealing plate, rubber plate, compactor body, hopper seat, mining rail wheels, vibrating hopper, pressed institutions, air duct systems, electronic control devices and other components.

Technical Parameter

Model                               PZ-5           
Injection capacity               5.5/h
Max conveying distance      200m
Water-cement ratio          < 0.4
Max aggregate size           15mm
Conveying pipe dia           φ50mm
Air pressure                  0.2-0.6MPa
Air consumption              7-8/min
Drive power                5.5kW(7.5hp)
Voltage class      380V,440V,660V,1140V 50Hz/60Hz
Chassis Chassis can be assembled into a tire, skid type, rail wheel

PZ-3 Dry Mix Shotcrete Machine

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

PZ-3  Dry Mix Shotcrete Machine

 Dry Mix Shotcrete Machine,conrete shotcrete machine, Concrete GuniteMachine

Product Introduction

PZ-3 Dry  spraying machine, whether it is wild jet slope, or building wall reinforcement, can meets your needs. And as for the machine, its requirements of the medium is not very high. Any materials can be injected unless the diameter is no more than 20mm..

This kind shotcrete machine uses the compressed air to convey or high-speed jet concrete mix with a certain proportion to the surface through the pipelines. The concrete mix on the surface set and harden to form concrete support layer. In recent years, shotcrete technology with a simple process, an unique effect, the economic cost and fast construction speed, is widely used in construction, rail and road tunnel construction, mine development, slope reinforcement and other fields.

Usage

PZ-3-type spraying machine is widely used in construction, mining, tunnels, culverts, subway, hydropower engineering, underground engineering and high marsh coal mine tunnel shotcrete construction operations,various industrial furnaces, repairing or spraying refractory lining and Various green slope, soil transport and injection.

Feature

1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving.

2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life., 

3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.

4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.

Maintenance and repair

（1） After finish work, be sure to clean the machine;

（2） Check all parts of the fastener, particularly the bolts on vibration hopper ;

（3） If have any problem on welded connections, timely treatment;

（4） While material cavity inside the machine, cyclone elbow, sleeve,  have a certain release,  check the cleaning and timely replace of wearing parts after the end of each class job.

Technical Parameter

Model                            PZ-3
Injection capacity            3/h
Max conveying distance    200m
Water-cement ratio         < 0.4
Max aggregate size          10mm
Conveying pipe dia          φ42/50mm
Air pressure                    0.2-0.6MPa
Air consumption              5-6/min
Drive power                   3kW(4hp)
Voltage class      380V,440V,660V,1140V  50Hz/60Hz
Chassis Chassis can be assembled into a tire, skid type, rail wheel

Putty Mortar Spraying Machine

 

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

Putty Mortar Spraying Machine

 Mortar Spraying Machine  ,  concrete sprayer machine  ,  shotcrete machine

N5 putty mortar spraying machine

This is a kind of spraying machine with superior performance and easy to operate. It’s a type of new machine which is designed based on German advanced products and considering the characteristics of construction and building materials, it is pretty suitable for operation. It’s highly reliable, able to adapt to any conditions, quite durable and easy to operate. This automatic spraying machine requires only three people for its operation. One person conveys the material, other controls the spraying gun, and the third one assists them (for instance: assist to remove the pipe).

  

The whole processes such as water adding, mixing and delivery of the material etc. are implemented by the machine automatically. Compared with the manual operation, it can save manpower, material resources, money and precious time, as well makes the construction quality better and more reliable than the traditional manual operation.

The whole set of spraying machine is also equipped with safe operation control system. During the operation, whichever part occur a fault, the whole machine will stop working. In this way, it can ensure safety not only of the operator but also the machine itself. Meantime, it can remind the operator to troubleshoot the machine, save as much time as possible.

KSP 5 Wet Concrete Spraying Machine

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

KSP 5 Wet Concrete Spraying Machine

Wet Concrete Spraying Machine   ,  wet shotcrete machine , concrete sprayer

Product Introduction

KSP-5 wet spraying machine is a new and efficient sprayed concrete machinery, mainly used for wet concrete mixing. It  can mix evenly, accurate control of water, help cement hydration, and thus it has the advantages of little dust, a small rebound concrete homogeneity, high strength. The aircraft has reasonable structure, stable performance, easy operation and maintenance, long service life, widely used in iron (public) road tunnel, subway, hydropower engineering, underground engineering and mine shaft shotcrete construction operations. KSP-5 wet spraying machine uses a unique way of cutting, so the material flow is uniformity, stability, and pulse is small. And highly rational feeding more effectively reduces labor intensity, to further improve the work efficiency.

Structure

KSP-5 type wet spraying machine consisted of mainly driving electric motor, reducer, the rotor body assembly, sealing plate, hopper seats, nozzle, vibrating hopper, sleeve, pressed bodies and accelerator conveyor systems, air duct systems and electronic control devices and other components.

Technical feature

1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving.

2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life., 

3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.

4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.

Technical Parameter

Working capacity: 5.5m3/h

Concrete Mix Ratio:  1: 4-5C/A

Water-cement ratio:  ≤0.4

Max conveying distance: 200m

Max aggregate dia:  Φ20mm

Conveying pipe dia:  Φ50mm

Air pressure:  0.2-0.4Mpa

Air consumption:  7-8m^3/min

Feeding height:  1.1m

Motor power:  5.5KW

Voltage class:  380V

Machine weight:  600kg

Outer size（L*W*H）2100*900*1280 (mm)

PC5T Wet Spraying Machine

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

PC5T Wet Spraying Machine

Wet Spraying Machine  , Wet  Shotcrete Machine   , shotcrete machine

Product Introduction

PC5T wet spraying machine is mainly used in iron (public) road tunnel project. Equipment is easy to operate, low dust, low rebound, protect the environment and improve the quality of shotcrete, a special vibration hopper can successfully enter the concrete batching system.

Feature

1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving.

2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life., 

3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.

4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.

Technical Parameter

Model                                                      PC5T

  Output                                            5m3/h

Rated work pressure                                  0.4MPa

Conveying distance(horizontal/vertical)        80/30m             

Air consumption                                      8m^3/min               

Max aggregate dia                                   ≤20mm             

Mix water-cement ratio                             0.2～0.35%         

Dust concentration                                  ≤20mg/m^3

Chassis rail wheels distance                        600/762/900mm

Outer size(L*W*H)                              1530*818*1188(mm)

Conveying pipe dia                                  φ51mm               

Rotor speed                                          11r/min           

Motor power                                          5.5kW

Voltage class                                      ～380/660V

5PCZ 5 Concrete Spraying Machine

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

5PCZ 5 Concrete  Spraying Machine

concrete spraying machine  ,  shotcrete machine   ,  Wet Concrete Spraying Machine

Usage

5PCZ-5-type spraying machine is widely used in construction, mining, tunnels, culverts, subway, hydropower engineering, underground engineering and high marsh coal mine tunnel shotcrete construction operations,various industrial furnaces, repairing or spraying refractory lining and Various green slope, soil transport and injection.

Feature

1. Through type rotary, non-sticky, unobstructed discharge, high efficiency and time-saving.

2. Four-point clamping device makes it easy to adjust the press between sealing plate and rotor disk so as to reduce air and dust leak and prolong consumption parts life., 

3. Using low-tension, high-speed vortex pneumatic transportation, so the spraying flow is even, continuous and steady. It's good to improve the shotcrete quality.

4. The new nozzle, discharge elbow device, improving spray deposition effect, less resilient, high quality shotcrete.

Technical Parameter

Model:	5PCZ 5	Output:	5~6m³/h
Max. Convey Distance :	horizontal:  200m, Vertical : 50m	Max. Aggregate Size:	Ø20mm
Hose Inner Size:	Ø20mm	Operating Pressure:	0.12~0.4Mpa
Air Consumption:	5-~8m³/min	Water-cement Ratio:	0.4
Duct Diameter:	50mm	Feeding Height:	1200mm
Motor Power:	5.5Kw	Voltage Class:	380V, 660V
Rail Distance:	600mm, 900mm	Machine Quality:	750Kg
Outer Size(L*W*H) :	1300*740*1200mm

HSP Mortar Shotcrete Mahine

chinacoal03

https://www.chinacoalintl.com
https://m.chinacoalintl.com/

Email: chinacoalservice@gmail.com 
E-mail: zhongmeixx12@gmail.com 

HSP Mortar Shotcrete Mahine  

Mortar Shotcrete Mahine  ,    shotcrete machine for mine ,  wet mix shotcrete machine

Product Introduction

HSP type concrete wet spraying machine is a new high efficient concrete machinery, mainly used for wet concrete, enabling mixture mixing evenly, accurate control of water will help cement hydration, so little dust , rebound small, concrete homogeneity and high strength. This machine have reasonable structure, stable performance, easy operation and maintenance, long service life, widely used in iron (public) road tunnel, subway, hydropower engineering, underground engineering and mine shaft shotcrete construction operations.

Feature

Greatly reduce the dust density next machine and outside of nozzle when the working of HSP type concrete wet spraying machine , eliminate health hazards to workers;

high production rate; resilience is low; because water-cement ratio is easy to control, concrete high degree of cure, it can greatly improve the quality of shotcrete to improve the homogeneity of the concrete.

Technical feature

(1)Through rotor chamber no binder , the material smooth, efficient and time-saving;

(2)Four point elastic compensation compression, good sealing effect, little dust next machine,wearing parts with long life ;

(3)Using low pressure high speed vortex air transport, overcome the bonding of material handling, plugging away from the pack and pulse problems, material flow uniform, continuous and stable.

(4)New nozzle, discharge elbow device, to improve spray deposition, less resilient, high quality shotcrete.

HSP model (wet-type) shotcrete machine
Model (Wet-type spraying machine)	HSP-5	HSP-7	HSP-9
Capacity (m3/h)	4-5	5-7	6-9
Max. Conveying Distance (Horizontal,Vertical m)	30,20	30,20	30,20
Feeding pipe inner diameters(mm)	51	51/64	51/64
Max. Aggregate Diameters (mm)	15	15	15
Working pressure (MPa)	0.3-0.6	0.4-0.6	0.4-0.6
Air consumption (m3/min)	10-15	10-15	10-15
Rotor Diameter(mm)	438	480(160)	480(175)
Springback (Average)	≤10%	≤10%	≤10%
Liguid accelerator content	0.3-0.7%	0.3-0.7%	0.3-0.7%
Motor Model	Y132M-6-5.5KW	Y160M-6-7.5KW	Y160M-6-7.5KW
Motor Power	0.37KW	0.37KW	0.37KW
The accelerator metering pump	Air operated	Air operated	Air operated
Voltage (V)  (according to customer's special requirement)	380,660,etc	380,660,etc	380,660,etc
Overall size (mm)	1280*700*1280	2000*800*1300	2000*800*1300
Overall weight (kg)	700	800	900